松边：纸张裱糊后在盒体的四个口边，出现粘附不紧实、纸与灰板间有悬空现象。

Loose edge: after the paper is pasted, there is loose adhesion and hanging between the paper and the gray board at the four edges of the box body.

折皱：裱糊后纸张表面形成不规则，长短不一的死折。

Crease: after pasting, the paper surface forms irregular dead folds of different lengths.

破角：纸张裱糊后在盒体的四个角出现纸张破损、露白的现象。

Broken corners: after the paper is pasted, the paper is damaged and exposed at the four corners of the box body.

露灰（露底）：由于刀版制作的准确性不够精确，或裱糊操作时定位的偏移，造成裱糊纸张折起后叠压处错位，致使灰板露出。

Exposed ash (exposed bottom): because the accuracy of knife plate making is not accurate enough, or the positioning offset during pasting operation, the stacking position of the paperboard is misplaced after folding, resulting in the exposure of the ash board.

起泡：盒体表面局部隆起不规则、大小不一的泡状体。

Blistering: irregular blisters of different sizes on the surface of the box.

胶渍：表面存留的胶水痕迹。

Glue stains: traces of glue left on the surface.

凸出物（暗疮）：有颗粒性物质残留在包料的下层，将表面局部撑起，破坏了盒体表面的平整度。

Protrusion (acne): there are granular substances left in the lower layer of the packing material, which locally prop up the surface and destroy the flatness of the box surface.

高低角：灰板半穿模切或开槽后，四边折起成型出现相邻的两个边高低不一致。

High and low angle: after the gray board is half through die cutting or slotting, the four sides are folded up to form, and the height of the two adjacent sides is inconsistent.

水波纹：盒体裱糊完成后，为使其边角黏附的更紧实，还需要用刮板对盒体的四个边进行刮边处理，由于用力不规范，整条边就会出现长短、凹凸不一的条状或小泡，似是水波纹。

Water ripple: after the pasting of the box body is completed, in order to make its edges and corners adhere more tightly, it is also necessary to scrape the four edges of the box body with a scraper. Due to the non-standard force, strips or bubbles with different length and concave convex will appear on the whole edge, which seems to be water ripple.

今天小编给大家呈现就是关于济南礼品盒的相关知识，如果您对于本文有什么疑问及问题欢迎来电咨询或者网站下边留言：http://www.liufangshun.com

Today, Xiaobian presents you the relevant knowledge about Jinan gift box. If you have any questions and questions about this article, please call us or leave a message below the website: http://www.liufangshun.com