热线:15064011858
        13245313178
        0531-88275058
当前位置:首页-新闻中心>行业资讯>包装箱厂为什么建议客户不做大面积水印?

包装箱厂为什么建议客户不做大面积水印?

来源:http://www.liufangshun.com/ 时间:2021-08-25 发布人:admin

包装纸箱厂经常回这样建议纸箱客户不建议“大面积印刷”或者“做不了大面积印刷”,这是为什么呢?

Packaging carton factories often suggest that carton customers do not recommend large-area printing "or" can't do large-area printing ". Why?

第一,大面积印刷会增加生产成本,首先印刷版跟水墨的用量会增大,这样直接增加了生产成本。其次,废品率会升高,间接地增加了成本。

First, large-area printing will increase the production cost. First, the amount of printing plate and ink will increase, which directly increases the production cost. Secondly, the scrap rate will rise, indirectly increasing the cost.

第二,对纸板的要求比较高,纸板厂的原料水平不一样,造成了纸板透楞、楞过硬、楞软,都会影响纸板的印刷。那么选择好一点的纸板不行么?这个我了解了一下,纸板受天气湿度影响,涂胶量多或少影响,都会出现纸板不平整,而且稍微出现不平整,纸板厂是不予退换的。

Second, the requirements for paperboard are relatively high. The raw material level of paperboard factories is different, resulting in the transparent, hard and soft of paperboard, which will affect the printing of paperboard. Can't you choose a better cardboard? I've learned that due to the influence of weather and humidity and more or less glue coating, the paperboard will be uneven, and if it is slightly uneven, the paperboard factory will not return it.

第三,对印刷机的要求严格。这么来讲,一般的纸箱厂的印刷机械20万左右。能做出效果好的大面积额印刷的印刷机大约需要800万左右。

Third, strict requirements for printing presses. In this way, the printing machinery of the general carton factory is about 200000. The printing press that can produce good large-area printing needs about 8 million.

那么如果大面积印刷就没有办法了么?回答是有办法,选择有纸板线的纸箱厂,这样能够直接干预纸板的生产,当然这样的单位是有起订要求的。像顺丰就是走的这条路。那么如果量也没有那么大呢?那只能选择胶印印刷,因为胶印印刷是先把图案印刷到一张纸上,在把纸贴在瓦楞上,这样就避免了瓦楞对印刷的影响。当然这样会增加纸箱的价格。如果是水印直接印到纸上,在贴瓦楞行不行?理论上这样说的过去,但还是水印机械的问题,一般的水印机械是不能印在纸上的,纸太薄了。

So if there is no way to print in a large area? The answer is that there is a way to choose a carton factory with a paperboard line, which can directly intervene in the production of paperboard. Of course, such units have initial requirements. Like Shunfeng, this is the way. What if the quantity is not so large? That can only choose offset printing, because offset printing first prints the pattern on a piece of paper and pastes the paper on the corrugated, so as to avoid the impact of corrugated on printing. Of course, this will increase the price of cartons. If the watermark is printed directly on paper, is it OK to stick corrugated? In theory, this is the past, but it is still the problem of watermark machinery. General watermark machinery can not be printed on paper. The paper is too thin.

以上就是包装箱厂家为大家分享的包装箱为什么不做大面积水印,有关纸箱其他分享请查看六方顺官网:http://www.liufangshun.com

The above is the reason why the packing box manufacturer did not make a large area watermark. For other sharing of cartons, please check the official website of liufangshun: http://www.liufangshun.com