热线:15064011858
        13245313178
        0531-88275058
当前位置:首页-新闻中心>公司动态>三个常见的木包装箱中怎么选择?

三个常见的木包装箱中怎么选择?

来源:http://www.liufangshun.com/ 时间:2021-08-14 发布人:admin

1.普通木包装箱

1. Ordinary wooden packing box

普通木包装箱内装物的质量不超过200千克,由侧面、端面、底面和盖子组成,端面先安装在侧面,然后底部和盖子安装在侧面和端面上。

The mass of the contents in the ordinary wooden packing box shall not exceed 200kg, which is composed of side, end face, bottom and cover. The end face shall be installed on the side first, and then the bottom and cover shall be installed on the side and end face.

2.框架木包装箱

2. Frame wooden packing box

框架木包装箱是一个大木包装箱,它的内装物大重量和大外尺寸是根据通常的运输条件确定的。一般情况下,外箱的框架木包装箱小于12米,外部宽度小于3.5m。外部高度小于3.5m,内装物品重量500-20000kg之内。这个木包装箱主要用于包装大型机械产品,也可以用来集装小件货物。框架木包装箱也由底座、侧面、端面和顶盖组成。

The frame wooden packing box is a large wooden packing box. Its large weight and large external size are determined according to the usual transportation conditions. Generally, the frame wooden packing box of the outer box is less than 12m and the outer width is less than 3.5m. The external height is less than 3.5m, and the weight of internal articles is within 500-20000kg. This wooden packing box is mainly used to pack large mechanical products, and can also be used to pack small goods. The frame wooden packing box is also composed of base, side, end face and top cover.

2-2103251042423N.jpg

它们的结构差异如下:框架木包装箱的箱板是垂直板:框架木包装箱板在外面,骨架全部布置在箱子里;框架木包装箱组装时,底座和两侧安装两面,上盖固定。它们都是以底座为基础的,但框架木包装箱在端面和侧面比滑木箱具有更多的框架结构。正因为有了这些框架结构,框架木包装箱才能承受比滑木箱更大的载荷。

Their structural differences are as follows: the box plate of the frame wood packing box is a vertical plate: the frame wood packing box plate is outside, and the skeleton is all arranged in the box; When assembling the frame wooden packing box, the base and both sides shall be installed on both sides, and the upper cover shall be fixed. They are all based on the base, but the frame wooden packing box has more frame structure on the end and side than the sliding wooden box. Because of these frame structures, the frame wooden packing box can bear more load than the sliding wooden box.

根据结构,框架木包装箱可分为Ⅰ类木质包装(内框架木包装箱):框架构件位于箱板内部,适合一般内容;第二类(外框架木包装箱):框架结构位于箱板外面,适合整体的长度方向,具有足够的刚度。其设计的基本规定考虑了通常的预期循环条件,如运输、装卸、卸货和保管。

According to the structure, the frame wooden packing box can be divided into class I wooden packing (inner frame wooden packing box): the frame member is located inside the box plate and is suitable for general contents; Type II (outer frame wooden packing box): the frame structure is located outside the box plate, which is suitable for the overall length direction and has sufficient stiffness. The basic provisions of its design take into account the usual expected cycle conditions, such as transportation, loading and unloading, unloading and storage.

3.滑木箱

3. Wooden box

滑木箱属于中型木包装箱,其内装质量限制在200~1500千克,外径之和为长、宽、高,以7米为限,宽度和高度小于1.5米,主要用于机械产品的包装,也可用于小件的装配。普通木箱主要以端面和侧面为基础,而滑木箱则主要以木箱底座为基础,比普通木箱承受更大的载荷。适用于中型产品外包装的木箱。滑木箱(B型箱)由底座、侧面、端面和顶盖组成。所述侧面和端面首先安装在所述底座上,然后将所述上盖安装在所述侧面和端面上。

The sliding wooden box is a medium-sized wooden packing box, with the internal mass limited to 200 ~ 1500 kg. The sum of the outer diameter is length, width and height, limited to 7 meters, and the width and height are less than 1.5 meters. It is mainly used for the packaging of mechanical products and the assembly of small parts. Ordinary wooden cases are mainly based on the end face and side, while sliding wooden cases are mainly based on the base of wooden cases, which bear greater load than ordinary wooden cases. Wooden cases suitable for outer packaging of medium-sized products. The wooden box (type B box) is composed of base, side, end face and top cover. The side and end faces are first installed on the base, and then the upper cover is installed on the side and end faces.

本文由济南包装箱厂整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.liufangshun.com我们会有更多精彩内容等你查看。

This article is compiled and released by Jinan packing box factory. Do you know something about these contents? For more information, please click: http://www.liufangshun.com We will have more wonderful content for you to see.