热线:15064011858
        13245313178
        0531-88275058
关键词搜索: 济南包装箱厂,济南手提袋,济南礼品盒,济南纸箱厂

手提袋印刷的加工流程是怎样的?

来源:http://www.liufangshun.com 时间:2021-01-16 11:03:27 发布人:六方顺 浏览量:

手提袋,顾名思义是用于载服物品,便于提携的袋子,运用频率是较高的。广泛应用于展览展会以及各种市场,流动性强,更好的向客户群传达一种信息。下面小编给大家介绍下手提袋印刷的加工流程。

Handbag, as the name suggests, is used to carry articles, easy to carry the bag, the use frequency is higher. Widely used in exhibitions and various markets, strong liquidity, better convey a kind of information to customers. The following small series to introduce the process of bag printing.

手提袋印刷过程中纸张上有1cm左右宽度的叼口边是印不到的,并且制品规模以外还需要有规则线、色标等,所以关于一般印件,都先将纸张裁得比制品大,印后加工时,再用切纸机或模切机将周围废纸边切掉。

In the process of bag printing, the paper with a width of about 1cm can not be printed. Besides the scale of products, regular lines and color codes are also needed. Therefore, for general printing, the paper is first cut larger than the products, and then the peripheral waste paper edge is cut off by a paper cutter or die cutter.

由于印张上有1cm左右宽度的叼口边是印不到的,并且制品规模以外还需要有规则线、色标等,所以关于一般印件,都先将纸张裁得比制品大,印后加工时,再用切纸机或模切机将周围废纸边切掉。

As the printing sheet has about 1cm width of its mouth edge is not printed, and the scale of products also need to have regular lines, color code, etc., so for general printing, the paper is first cut larger than the product, and then the paper cutter or die cutter is used to cut off the surrounding waste paper edge during post press processing.

                                       济南手提袋

手提袋印刷的压痕加工假如是用厚纸板替代压痕线,模切和压痕就不宜一起进行,所以手提纸袋一般只进行压痕加工,而不进行模切加工。

If the indentation processing of handbag printing is to replace the indentation line with cardboard, die-cutting and indentation should not be carried out together, so generally, only indentation processing is carried out for portable paper bags instead of die-cutting.

当开纸尺寸严重时,旁边面粘口和折口能够略微窄一点,假如手提纸袋很大则要略微宽一些。手提纸袋的底=0.5×b+底部粘口,底部粘口一般为1cm左右,假如手提纸袋较大也能够宽一些。由于印张上有1cm左右宽度的叼口边是印不到的,并且制品规模以外还需要有规则线、色标等,所以关于一般印件,都先将纸张裁得比制品大,印后加工时,再用切纸机或模切机将周围废纸边切掉。

When the size of open paper is serious, the side surface adhesive opening and folding opening can be slightly narrower. If the portable paper bag is large, it should be slightly wider. The bottom of the hand-held paper bag is 0.5 × B + the bottom adhesive opening. The bottom adhesive opening is generally about 1cm. If the hand-held paper bag is larger, it can be wider. As the printing sheet has about 1cm width of its mouth edge is not printed, and the scale of products also need to have regular lines, color code, etc., so for general printing, the paper is first cut larger than the product, and then the paper cutter or die cutter is used to cut off the surrounding waste paper edge during post press processing.

手提纸袋的压痕加工假如是用厚纸板替代压痕线,模切和压痕就不宜一起进行,所以手提纸袋一般只进行压痕加工,而不进行模切加工。

If the indentation processing of portable paper bag is to replace the indentation line with cardboard, die-cutting and indentation should not be carried out together, so portable paper bag generally only carries out indentation processing instead of die-cutting.

以上就是关于手提袋印刷的加工流程的相关介绍,期望能够协助到大家。

The above is about the bag printing process related to the introduction, I hope to help you.